Replica Racer Specifications

[toratora]

A thread for specifications.

[toratora]

[toratora]

Derbi torque specs.pdf

[Karim]

2005-2014 GPR50 & 2006-2018 RS4-50/RS50 Tire Specifications

          GAWR            Tire              Rim           PSI Cold
Front    220 LBS        100/80-17         2.75x17"          24.7
Rear     419 LBS        130/70-17         3.50x17"          26.1

[Rj_666]

MOST fasteners for a 99-05 RS50. YMMV !!

Rad Brackets
3 - 6 x 1.0 x 12mm Hex Head
1 - 6 x 1.0 x 35mm Hex Head
2 - 6 x 1.0 x 16mm Hex Head
1 - 5 x .8 Nylock Nut w/ Flange
1 - 5 x 16mm Washer

Starter
2 - 6 x 1.0 x 25mm Allen Socket Head
1 - 5 x .8 x 20mm Allen Socket Head
1 - 5 x .8 x 12mm Allen Socket Head
3 - 4 x .7 x 35mm Allen Socket Head
2 - 4 x .7 x 12mm Allen Socket Head

Reed Cage
4 - 6 x 1.0 x 24mm Allen Socket Head

Forks
1 - 6 x 1.0 x 30mm Allen Socket Head
2 - 5 x .8 x 16mm Fork Caps Allen Socket Head

Upper Frame
7 - 8 x 1.25 x 50mm Hex Head w/Flange
7 - 8 x 1.25 Nylock Nuts w/Flange
4 - 6 x 1.0 x 16mm Fairing Stay Brackets Hex Head

Front Fender
4 - 6 x 1.0 x 16mm Allen Button Head
4 - 6 x 1.0 x 12mm Allen Button Head
4 - 6 x 1.0 Nylock Nuts w/o Flange Upper Fairing
2 - 6 x 1.0 x 30mm Hex Head w/Flange
4 - 6 x 1.0 x 16mm Mirrors Allen Button Head
2 - 6 x 1.0 Nylock Nuts w/Flange

Rear Shock
2 - 10 x 1.25 x 65mm Hex Head w/Flange
2 - 10 x 1.25 Nylock Nuts w/Flange

Clutch
4 - 5 x .8 x 20mm Allen Button Head
4 - 5 x 15mm Washer
1 - 14 x 1.25 Pressure Plate Nut

Tank
2 - 6 x 1.0 x 30mm Tank Bracket Hex Head
1 - 6 x 1.0 x 70mm Tank Pivot Hex Head
5 - 4 x .7 x 10mm Gas Cap Allen Socket Head
2 - 6 x 1.0 x 12mm Gas Cap Allen Button Head
2 - 6 x 1.0 x 12mm Fuel Cock Allen Button Head
2 - 6 x 1.0 x 15mm Tank Cover Allen Button Head
1 - 6 x 1.0 x 50mm Allen Socket Head
5 - 6 x 1.0 Nylock Nuts w/Flange

Triple Clamp
6 - 8 x 1.25 x 25mm Allen Socket Head
1 - 6 x 1.0 x 12mm Brake Line Clamp Allen Button Head
2 - 10 x 1.25 x 60mm Handle Bars Allen Socket Head
2 - 6 x 1.0 x 35mm Bar Ends Allen Socket Head
2 - 8 x 1.25 x 16mm Ignition Allen Socket Head

Chain Adjusters
2 - 8 x 1.25 x 45mm Hex Head
2 - 8 x 1.25 Nuts w/Flange

Water Pump
1 - 6 x 1.0 x 25mm Coolant Drain 12mm Head Dia.
1 - 6 x 1.0 x 25mm Allen Socket Head
1 - 6 x 1.0 x 12mm Allen Socket Head

Oil Injector Pump
2 - 5 x .8 x 35mm Allen Socket Head
2 - 5 x .8 x 16mm Allen Socket Head

Clutch Cover
1 - 6 x 1.0 x 8mm Oil Level 12mm Head Dia.
7 - 6 x 1.0 x 30mm Allen Socket Head
1 - 6 x 1.0 x 55mm Allen Socket Head

Flywheel & Cover
5 - 5 x .8 x 20mm Allen Socket Head
1 - 5 x .8 x 12mm Allen Socket Head
3 - 4 x .7 x 10mm Stator Allen Button Head

Crankcase
13 - 6 x 1.0 x 40mm Allen Socket Head
1 - 8 x 1.25 x 10mm Oil Drain 15mm Head Dia.

Front Sub Frame
3 - 8 x 1.25 x 100mm Motor Mount Bolts
4 - 8 x 1.25 x 35mm Sub Frame Bolts
5 - 8 x 1.25 Nylock Nuts w/Flange

Sprocket Cover
2 - 5 x .8 x 20mm Allen Socket Head

Rear Sprocket
5 - 8 x 1.25 x 20mm Hex Head w/Flange

Rear Brake/Caliper/Rotor
2 - 8 x 1.25 x 20mm Hex Head w/Flange
5 - 8 x 1.25 x 25mm Flat Head
2 - 6 x 1.0 x 20mm Master Cylinder Allen Button Head
1 - 6 x 1.0 x 16mm Reservoir Allen Button Head
1 - 6 x 1.0 Nylock Nuts w/Flange
2 - 6 x 1.0 Nylock Nuts w/o Flange

Rear Sets
4 - 8 x 1.25 x 30mm Hex Head w/Flange
4 - 8 x 1.25 Nylock Nuts w/o Flange

Front Brake/Caliper/Rotor
2 - 8 x 1.25 x 30mm Hex Head w/Flange
5 - 6 x 1.0 x 25mm Allen Button Head

Rear Sub Frame
2 - 10 x 1.25 x 35mm Hex Head w/Flange
2 - 8 x 1.25 x 25mm Hex Head w/Flange
2 - 8 x 1.25 x 20mm Hex Head w/Flange
2 - 8 x 1.25 Nylock Nuts w/o Flange

Gauge Cluster
3 - 5 x .8 Nylock Nuts w/Flange
5 - 4 x .7 Nylock Nuts w/Flange
3 - 5 x 18mm Washer
5 - 4 x 16mm Washer

[toratora]

2005-2009 Derbi GPR125 Shock Specs

These are the dimensions of the two stroke 125 GPR that Derbi produced from 2005 to 2009. The shock would fit on a 50cc GPR from the same edition. The main difference between the two were the ability to adjust the preload, but the damping on the 125 shock was also better.

For ordering an aftermarket shock these specifications would be quite handy.

[toratora]

Derbi General Torque Settings

[toratora]

Aprilia RS50 2006-2009 Service Reset

Aprilia RS50 Dashboard Service Reset Proceedure

To reset the service warning light

1. Turn the ignition key to off
2. Press and hold the Mode switch
3. Turn the ignition key to on
4. Continue to hold the mode switch for 10 seconds
5. During this operation the service icon will flash

[toratora]

AM6 Torque Settings