GPR Track Bike: Sliders
Posted: Fri Aug 25, 2017 3:39 pm
Manimal posted this up info from Dixon earlier on another foro:
If you have rear sets on the bike with non-folding pegs they are allowable with sliders on the ends of them. Ed asked them about that since most MiniGP bikes have pegs that don't fold up.
Ed also suggest getting the bar end lever protectors. Woodcraft makes some nice ones.
As Denee showed us PitBull makes some weld on bungs for stand spools, and you can get spools that double as sliders. SVRacing makes spool sliders in M6, M8, and M10 sizes. Another option is this the budget way of employing long nuts as illustrated in this photo.
Also there are bolt on solutions like this one from T-rex.
Due to these requirements I probably wont have my bike ready in time for this Sunday. To get rear sliders I'm probably going to have to take the rear end of the bike apart again so that I can weld on the rear slider mounts.Manimal wrote:We want sliders, handle bar covers, foot pegs that fold up.
If you have rear sets on the bike with non-folding pegs they are allowable with sliders on the ends of them. Ed asked them about that since most MiniGP bikes have pegs that don't fold up.
Ed also suggest getting the bar end lever protectors. Woodcraft makes some nice ones.
As Denee showed us PitBull makes some weld on bungs for stand spools, and you can get spools that double as sliders. SVRacing makes spool sliders in M6, M8, and M10 sizes. Another option is this the budget way of employing long nuts as illustrated in this photo.
Also there are bolt on solutions like this one from T-rex.