I have looked over Tora's excellent "Stop that man" post, but I don't see on the site whether the Brembo RCS14 is appropriate for the 2-piston AJP caliper. I have looked over the hydraulic ratio information available and it looks to me that the ratio is a bit low (I get 9.2). But, the ratios get a bit wonky when dealing with a two-piston slider caliper.
Has anyone successfully used the Brembo RCS14 in combination with the AJP 2-piston slider caliper?
Support GPR Camp!!
Another Master Cylinder Post
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Another Master Cylinder Post: Coming to a stop
![Image](https://i.imgur.com/wtjsWYS.jpg)
The thing about most of those charts is that they don't relay the displacement of the caliper pistons. They just count the number of them. I think the stock master on the older GPRs is a 12, so the 14 is a little on the hard side, but because it is such a much nicer master over all there is a significant improvement.
0 x