![Image](https://i.imgur.com/AaVhCig.jpg)
![Image](https://i.imgur.com/hweWy4m.jpg)
![Image](https://i.imgur.com/BasFxhK.jpg)
![Image](https://i.imgur.com/YqLmcba.jpg)
![Image](https://i.imgur.com/AeLwhjz.jpg)
![Image](https://i.imgur.com/x1yKhWS.jpg)
Yeah i've got led lights and they're cool, just bigger, but cool
![Image](https://i.imgur.com/KxWTqhI.jpg)
![Image](https://i.imgur.com/Pqm20Ik.jpg)
![Image](https://i.imgur.com/SGlaKQm.jpg)
![Image](https://i.imgur.com/rR0xyVB.jpg)
![Image](https://i.imgur.com/fZzQK3R.jpg)
![Image](https://i.imgur.com/YmOdduT.jpg)
![Image](https://i.imgur.com/WNr3Xuj.jpg)
![Image](https://i.imgur.com/Y6bi2tD.jpg)
![Image](https://i.imgur.com/zLX3E88.jpg)
![Image](https://i.imgur.com/4wAAMSt.jpg)
![Image](https://i.imgur.com/tuzpTAk.jpg)
![Image](https://i.imgur.com/Q1jEj3z.jpg)
![Image](https://i.imgur.com/4qfSKVN.jpg)
![Image](https://i.imgur.com/zLjgTs3.jpg)
![Image](https://i.imgur.com/Tuac7a4.jpg)
![Image](https://i.imgur.com/sFAUGJG.jpg)
Thanks very much for the answer jayjkv357 wrote: ↑Fri Nov 13, 2020 10:33 amHonestly, you shouldn't need to do any of that.
The problems may come because of aggressive media blasting to strip the wheel. When I strip a wheel I do it chemically, and the media blasting is very moderate - not enough to affect the mount areas for the rotors or the bearing pockets (no need to blast down into the bearing pockets).
If you wanted to protect the bearing pockets you can use a rubber stopper, and tap it into the opening securely.
The areas where the rotors mount and bearings seat should be masked, after prep and cleaning, before painting or powder coating.
You need to find someone that knows what they are doing so they don't wreck the wheels.
Jay
www.apexcustomcoating.com