Support GPR Camp!!

Remaining Gimbal

Reviews, techniques, and general information for recording the moto experience.
User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Remaining Gimbal

Post by toratora » Sun Jan 28, 2018 12:39 am

There are a number of innovative gimbals making it onto the market. These are amazing devices that can dramatically improve your video production value. This thread is dedicated for these products.
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Zhiyun Rider-M Review

Post by toratora » Sun Jan 28, 2018 1:39 am

https://www.youtube.com/watch?v=ClPmgIFAqWw
This gimbal aimed at the moto community is really great. The only disadvantage with it is it's not shielded from water like some of the other units such as the Feiyu Tech WG2, but the WG2 doesn't power the camera either.
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Feiyu Tech WG2 | Waterproof 3-Axis Gimbal

Post by toratora » Sun Jan 28, 2018 2:39 am

https://www.youtube.com/watch?v=vkOoykUEYAE
Like the Rider M the WG2 is another wearable gimbal that works great with motos. The advantages over the Rider M include protection against DHMO, and a programmable pan. The batteries are not removable, but it can run off of external power. The one other disadvantage is that it cannot power the camera like the Rider M can do. The design is also less fidgety than the Rider M meaning that you are less likely to lose a screw.
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

How to use the Zhiyun Smooth Q and a GoPro with no Adapter

Post by toratora » Sun Jan 28, 2018 3:39 am

https://www.youtube.com/watch?v=DFdC49IVKWY
The Smooth Q is a popular gimbal made for the iPhone, however it can be put into service as a GoPro gimbal either with an adapter plate, or as this clever video illustrates directly. Apologies for the most horrible BGM.
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Zhiyun Smooth Q Complete Setup and Controls Tutorial

Post by toratora » Sun Jan 28, 2018 6:15 pm

0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Top 5 Best Wearable Action camera Gimbals (2018)?

Post by toratora » Mon Jan 29, 2018 5:39 pm

0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Remaining Gimbal: Report

Post by toratora » Tue Mar 27, 2018 3:39 pm

I've been investigating the Gimbal situation. So far I've engaged with four of them to varying degrees, and I expect this will be an ongoing adventure. There's enough information about them that I will provide a post of each one. As I learn about them I can then update that post.

Wearable Gimbals
  • Feiyu Tech WG-2 Wearable Gimbal
  • Holhem XG-1 gimbal
  • YI Handheld Gimbal
iPhone Gimbals
  • Zhiyun Smooth-Q iPhone Gimbal
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Remaining Gimbal: Feiyu Tech WG-2 Wearable Gimbal

Post by toratora » Tue Mar 27, 2018 9:39 pm

Image
By far the coolest one of these four is the Feiyu Tech WG-2 wearable gimbal. It is water proof (to some degree), has really cool features (like programable movements), and a decently featured app. I did find that sometimes the app/gimbal became so confused that the iPhone had to be powered down, and restarted before the app could find the WG-2. The build quality is quite high with this gimbal. It features two 1/4-20 camera mounts. One on the bottom, and another on the backside. The WG-2 features a built in battery that can be charged via a USB cable.
► Show Spoiler
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Remaining Gimbal:YI Handheld Gimbal

Post by toratora » Tue Mar 27, 2018 11:39 pm

Image
The YI is one of the least expensive wearable gimbals, and it shows with it's lack of included accessories. The YI doesn't even come with a case, or pouch. It does include a battery charge, but it is required since that's the only way to recharge it. While there is a USB port on the YI it cannot be charged with it. The USB port is only there for firmware updates. This means that you cannot mount the YI on the bike and power it externally. Other gimbals like the XG-1 can be powered from external batteries, or power sources.
► Show Spoiler
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Remaining Gimbal: Hohem XG1 Wearable Gimbal

Post by toratora » Mon Jul 16, 2018 9:39 am

Image
Hohem XG1 Wearable Gimbal

I've tried multiple wearable gimbals and for the money the Hohem XG1 is hard to beat. It works well with the GoPro 5/6 cameras, but isn't setup for the GoPro Cube cameras like the Feiyu Tech WG-2. Also unlike the Feiyu Tech the XG1 isn't water resistant—meaning you really don't want to use this gimbal if it's raining.

The XG1 motors are quiet, and it can power a camera from the built in battery, or pass it through from the USB charging port. However, it doesn't come with the small cable, nor would it easily plug into the GoPro, because the power port on the camera is on the same side as the side motor. It is possible to flip the camera around, but this puts more strain on the motor to keep things balanced, thus will cause the batteries to deplete sooner. It also restricts the range of motion. Additionally, the mount will then occlude part of the GoPro's touch screen.

On the bottom of the XG1 is located a single 1/4 20 camera mount. Some of the other wearables feature two mounts—one on the bottom, and one on the side. This makes it easier to accommodate various applications. It is unfortunate that there is only one mount on the XG1, but this is probably due to controls being placed on the side of the gimbal. The XG1 mount is sturdy as it is made out of metal rather than plastic. There is an included GoPro style adapter that is secured to the XG1 via two small included screws over the 1/4 20 mount—you can not have both available at the same time. An Allen wrench is included for installation.

Image
Hohem XG1 Wearable Gimbal
I've found the XG1 works quite well in flashlight mode when a short foldable tripod is connected to the unit. In this mode the rage of motion is maximized as the camera is unlikely to make contact with the base of the gimbal.

There is an app for the Gimbal that is very basic, but it has some nice features like displaying the battery level. From the app four different gimbal modes can be selected—Yaw follow, Pitch follow, All lock, and All follow. The app can re-center the XG1 with a single touch, and the gimbal can be controlled via the app. Unlike the WG-2 there is no means to set up programed movements for time duration shots. The app while being basic connects better than most.

The app can also be employed to calibrate the XG1, and customize the follow speed, joystick speed, and follow dead area settings. This is very nice for being able to get the coveted cinematic shots by slowing down the movement of the gimbal.

The XG1 isn't designed to have a replaceable battery, but the cover is removable, and it might be possible to replace it. That you can power it from an external source though pretty much removes this need, and if you set up a cable from the XG1 to the camera you can have extended recording times.

One of the top features of the Hohem is the carry case. The XG1 comes with the best case of all of the wearable gimbals I've investigated. It is a semi hard shell with a zipper that opens it up like a clam. Inside is a velcro strap to secure the gimbal, and there is enough room to leave the camera installed. There is also room for a charging cable.

Like most of the wearable gimbals the XG1 does not include a power charging adapter. Hohem expects you to charge the gimbal from a standard USB charger/device. The port on the XG1 is a USB 2.0 Micro, and the camera connector is a USB 2.0 Mini. The GoPro 5/6 cameras employ a USB 3.0 C connector. To connect the XG1 to a GoPro would require a male to male cable with C on one end, and Mini on the other. Then a Micro to connect the gimbal to the power source.

Hohem XG1 has some nice features, works well, and is solidly made. Sure it doesn't have some of the stand out features of the Feiyu Tech, but depending on your needs the XG1 is likely to be a dependable tool in your camera kit.
1 x

Post Reply