Support GPR Camp!!

Aprilia RS4 Farkle and Bling

How to's for Replica Racers
User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Aprilia RS4 Farkle and Bling

Post by toratora » Fri Dec 22, 2017 5:28 pm

I've been doing some looking around, and I typically stumble upon some cool things that I've found for the RS4. Some of these things will work on the various RS50s and Derbi GPRs as well. One of these things was the carbon fiber fender that I picked up from Tyga. I figured that if I like these things, then other folks might like to know about them too. ;)

Image
Tyga Carbonfiber Accessories
Tyga
I'll start off with the Tyga products, and then make posts for other things I find. Currently Tyga makes a front fender, a chain guard, and a rear hugger in carbon fiber for the RS4. They refer to it as an RSV125, maybe the bike is marketed under that moniker in Thailand. I have this fender which I've fitted onto my 2005 Derbi GPR. The quality of the fender is very high. The fit and finish is amazing. It should fit on any of the Derbi and Aprilia replicas from 2005 to current. If you have the inverted forks with the radial caliper it should be compatible.
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Evotech RS4 Farkle

Post by toratora » Fri Dec 22, 2017 5:35 pm

Image
Evotech
Evotech is one of those companies that makes nice add ons like fender eliminators (license plate holders), radiator guards, and bar end weights. Considering the quality (from the photos) the pricing doesn't seem too outrageous—although it is far from cheap. If you are looking to bling out your RS4, or 2010+ GPR these are a nice way to do it.

Radiator Guard
Image
Tail Tidy
Image
Bar Ends
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

R&G RS4 Farkle

Post by toratora » Fri Dec 22, 2017 5:38 pm

Image
R&G
Another farklator would be R&G focusing on very similar products to Evotech, but with some nice additions.

Swing Arm Spools. These are nice because they don't require welding or drilling.
.
Image
Crash Guard. These might actually also fit on the RS50 frame, but I don't know for sure. They would probably require modifying the plastics though.
.
Image
Radiator Guard
.
Image
Tail Tidy
.
Image
Bar Ends
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

A-Tech Fiber

Post by toratora » Fri Dec 22, 2017 5:42 pm

Image
We!Bike
We!Bike carries a number of Farkle products for the RS4 including Fiber from A-Tech

Carbon fiber "Number Plate"
.
Image
Tail Section
.
Image
Front Fender
.
Image

Image
Hugger
.
Image
Chain Guard
.
Image
Lower Chain Guard
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Aprilia RS4 Farkle and Bling: Babyface

Post by toratora » Fri Dec 22, 2017 5:44 pm

Image
Babyface
Another brand via We!Bike is Babyface providing spools, and rear sets.

Spools
.
Image

Image
Rear Sets

Tthese look a lot like another brand—Sato.
.
Image
Crash Guard
.
Image
Set Backs

These let you place your rear sets even further back.
.
Image
Helmet Lock
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Aprilia RS4 Farkle and Bling: Sato

Post by toratora » Fri Dec 22, 2017 5:46 pm

Image

Image
Sato
As it turns out it looks like the Babyface parts are actually Sato's! These rear sets, and crash bars are from Sato.

Sato Racing Rearsets Aprilia RS4 125 11-15'
.
Image

Image
Sato Racing Frame Sliders Aprilia RS4 125 11-15'
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Over Racing

Post by toratora » Fri Dec 22, 2017 5:50 pm

Image

Image

Image
Over Racing
I've been meaning to get back to this thread for a while now, and here you go with something really special from Over Racing. They have been making high end motorcycle kit for decades. Their racing history is very impressive.

Billet Triples
.
Image

Image
Rear Sets
.
Image

Image
Crash Protectors
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

Stage6 Silicone Radiator Hose

Post by toratora » Fri Dec 22, 2017 5:52 pm

Image

Stage6
Stage6 offers a silicone radiator hose kit for the Derbi Euro3 engine, which can be found on the RS4 50 two stroke bike.
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

MXS Silicon Radiator Hose Kit

Post by toratora » Fri Dec 22, 2017 5:53 pm

Image

MXS
MXS offers a silicone radiator hose kit for the Derbi Euro3 engine, which can be found on the RS4 50 two stroke bike.
0 x

User avatar
toratora
Posts: 3161
Joined: Wed Oct 11, 2017 1:05 am
Location: San Francisco
Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50
x 1768
x 1977
Contact:

GSG Spools and Sliders

Post by toratora » Fri Dec 22, 2017 5:55 pm

0 x

Post Reply